Prefabricated PROFINET cable, CAT5e, shielded, star-quad four-wire group, 22 AWG flexible stranded wire (19-wire system), RAL 6018 (yellow-green), free termination of the cable, M12 hole socket, rear board/M16 thread installation , Straight connection, length: 2 m
Advantages
- Cables of different standard lengths are pre-installed, ready for immediate use
- The connector assembly method and cable length can be customized
- The cable side is sealed to ensure the tightness of the seal
- The cable is designed for all common networks and fieldbuses
- High transmission safety can be achieved: the shield connection to the shell uses an optional EMC nut
Product Picture
-
Chart
-
Size chart
-
Size chart
-
Wiring capacity
Key business data
| Orderkey |
1416263-s |
|---|
| Packaging unit |
1 STK |
|---|
| Sales key |
ABQCED - |
|---|
| Contents page |
Page 311 (PC_2011) |
|---|
| GTIN |
4046356473453 |
|---|
| Single piece weight (without packaging) |
139.700 g |
|---|
Size
Environmental conditions
| Protection level |
IP67 (when inserted) |
|---|
| |
IP65 (if inserted) |
|---|
| Ambient temperature (operation) |
-25 °C ... 85 °C (pin/hole) |
|---|
| |
-40 °C ... 85 °C (without mechanical drive) |
|---|
General data
| Notes |
To achieve the specified electrical and mechanical parameters, it must be ensured that the connector pair has been correctly locked and installed. If the connector is not locked or there is a risk of being contaminated, it must be sealed with a protective cover of protection class > IP54. The impact caused by stranded wires, cables, or PCB components must also be considered. |
|---|
| Rated current at 40 °C |
4 A (Plugs/sockets comply with IEC 61076-2-101 standard requirements and must comply with cable technical data) |
|---|
| Rated voltage |
250 V |
|---|
| Rated surge voltage |
2.5 kV |
|---|
| Number of digits |
4 |
|---|
| Signal type/classification |
PROFINET CAT5 (IEC 11801:2002), 100 Mbps |
|---|
| Standards/Specifications |
M12 pin plug connector IEC 61076-2-101 |
|---|
| Overvoltage rating |
II |
|---|
| Pollution level |
3 |
|---|
| Short-term alternative product description |
PROFINET cable |
|---|
| Plug/Unplug Cycle |
≥ 100 |
|---|
| Contact carrier material |
PA 6.6 |
|---|
| Material contact surface |
Ni/Au |
|---|
| Transmission characteristics (category) |
CAT5 |
|---|
Standards and specifications
| Standards/Specifications |
M12 pin plug connector IEC 61076-2-101 |
|---|
| Flame retardant grade, in line with UL 94 |
V0 |
|---|
Cable
| Cable type |
PROFINET robot CAT5 |
|---|
| Cable type (abbreviation) |
93R |
|---|
| UL AWM form |
20233 (80°C/300 V) |
|---|
| Signal type/classification |
PROFINET CAT5 (IEC 11801), 100 Mbps |
|---|
| |
EtherCAT® CAT5 (IEC 11801), 100 Mbps |
|---|
| Cable structure |
1x4xAWG22/19; S/TQ |
|---|
| Wire cross section |
4x 0.34 mm² |
|---|
| AWG, signal wire |
22 |
|---|
| Wire structure Signal line |
19x 0.15 mm |
|---|
| Core diameter (including insulation layer) |
1.5 mm |
|---|
| Wire color |
White, yellow, blue, orange |
|---|
| Total stranded wire |
Star quad four-wire group |
|---|
| Blocking |
The shielding net uses tinned copper wire |
|---|
| Optical cable shielding cover |
85 % |
|---|
| Outer sheath, color |
Green RAL 6018 |
|---|
| Outer sheath thickness |
About 1 mm |
|---|
| Cable outer diameter D |
6.5 mm ±0.2 mm |
|---|
| Minimum bending radius, fixed installation |
5 x D |
|---|
| torque |
± 180 °/m (1 000 000 bends) |
|---|
| Cable weight |
55 kg/km |
|---|
| Outer sheath, material |
PUR |
|---|
| Wire insulation material |
Expanded polyethylene |
|---|
| Wire material |
Tinned copper stranded wire |
|---|
| Insulation resistance |
≥ 500 MΩ*km |
|---|
| Loop resistance |
≤ 120.00 Ω/km |
|---|
| wave impedance |
100 Ω ±5 Ω (100 MHz) |
|---|
| Attenuation |
2.9 dB (1 MHz) |
|---|
| |
5 dB (4 МHz) |
|---|
| |
8.1 dB (10 MHz) |
|---|
| |
10.4 dB (16 MHz) |
|---|
| |
11.9 dB (20 МHz) |
|---|
| |
15.5 dB (31.25 МHz) |
|---|
| |
26.5 dB (62.5 МHz) |
|---|
| |
41 dB (100 MHz) |
|---|
| Signal running time |
4.8 ns/m |
|---|
| Nominal cable voltage |
300 V |
|---|
| Wire core test voltage/wire core |
2000 V (50 Hz, 1 min) |
|---|
| Wire core test voltage/shield |
2000 V (50 Hz, 1 min) |
|---|
| Flame retardant |
Comply with IEC 60332-1-2 |
|---|
| Halogen free |
Comply with IEC 60754-1 |
|---|
| Oil resistance |
Comply with DIN EN 60811-2-1 standard |
|---|
| Other protection features |
UV protection in accordance with UL 1581, Part 1200 |
|---|
| Ambient temperature (operation) |
-40 °C ... 80 °C |
|---|
| |
-40 °C ... 80 °C |
|---|
| Ambient temperature (installation) |
-20 °C ... 60 °C |
|---|
| Ambient temperature (storage/transport) |
-40 °C ... 80 °C |
|---|
| Blocking |
Yes |
|---|
Environmental Product Compliance
| REACh SVHC |
Lead 7439-92-1 |
|---|
| China RoHS |
For more details on hazardous substances, please refer to the "Manufacturer's Declaration" in the "Download Area" |
|---|
Classification
ECLASS
| ECLASS 10.0.1 |
27060308 |
|---|
| ECLASS 11.0 |
27060308 |
|---|
| ECLASS 4.0 |
24010400 |
|---|
| ECLASS 4.1 |
24010400 |
|---|
| ECLASS 5.0 |
19030300 |
|---|
| ECLASS 5.1 |
19030300 |
|---|
| ECLASS 6.0 |
27060300 |
|---|
| ECLASS 7.0 |
27060308 |
|---|
| ECLASS 9.0 |
27060308 |
|---|
ETIM
| ETIM 4.0 |
EC000830 |
|---|
| ETIM 6.0 |
EC001262 |
|---|
| ETIM 7.0 |
EC001262 |
|---|
UNSPSC
| UNSPSC 6.01 |
26121616 |
|---|
| UNSPSC 7.0901 |
26121616 |
|---|
| UNSPSC 11 |
26121604 |
|---|
| UNSPSC 12.01 |
31261501 |
|---|
| UNSPSC 13.2 |
26121604 |
|---|
| UNSPSC 18.0 |
26121604 |
|---|
| UNSPSC 19.0 |
26121604 |
|---|
| UNSPSC 20.0 |
26121604 |
|---|
| UNSPSC 21.0 |
26121604 |
|---|
